Feb 8, 2012
| problems&solution of the flatbed printer | |||
number |
phenomena |
reason |
Solution |
1 |
the ceramic board broke into pieces |
the pressure is too much |
adjust the pressure knob to a suitable one |
2 |
the color is weak |
the heating time is too short |
add the heating time |
3 |
the image is illegibility |
the heating time is too long cause the printing ink diffused |
reduce the heating time |
4 |
part of the color is weak |
the pressure is not enough or the board is not flat or the coat is not so even |
increase pressure or change the board |
5 |
some of the finished product is blur relative to the same place of the heating board |
patr of the heating board doesn`t work caused the heat is uneven |
change the heating board |
6 |
the transfer printing picture is accidented |
the heating time is too long |
reduce the heating time |
| problems&solution of plate press | |||
number |
phenomena |
reason |
Solution |
1 |
the color is too weak |
the heating time is too short |
add the heating time |
2 |
the picture is illegibility |
the heating time is too long cause the printing ink diffused |
reduce the heating time |
3 |
part of the color is too weak of the finished product |
the pressure is not enough or the coat is uneven |
increase the pressure or change the heating board |
4 |
the brim of the picture is too unclear |
the diameter of picture is too long or the pressure is too much |
Reduce the diameter or increase the pressure |
5 |
the transfer printing picture is accidented |
the heating time is too long |
reduce the heating time |
| problems&solution of mug press | |||
number |
phenomena |
reason |
Solution |
1 |
the color is too weak |
the heating time is too short |
add the heating time |
2 |
the picture is illegibility |
the heating time is too long cause the printing ink diffused |
reduce the heating time |
3 |
part of the color is too weak of the finished product |
the pressure is not enough or the coat is uneven |
increase the pressure or change the heating board |
4 |
some of the finished product is blur relative to the same place of the heating board |
there is some problem of the heating mat |
change the heating mat |
5 |
the transfer printing picture is accidented |
the heating time is too long |
reduce the heating time |
visiter
(Authoritative Certification)
