Description of Heat transfer printing product:

Using introduction of Special-grade enduring ultraviolet ray protection layer product

I.product performance

1. It can endure heat well, when exposured under strong sunlight, it can keep the primary color and could not turn yellow
2. coat is clear and bright
3. this product ownes a high luster degree
4. Coat is firm and durable ,and can withstand outdoor sandstorm and acid rain erosion
5. the product can endure scrape ,abrading or concussion

II.tools

1. Spray gun
2. Air Pump (Air Compressors)
3. Exhaust equipmen
4. Industrial ovens with blast

III.Operation processes

1. Products'face is sprayed four times evenly according to vertical horizontal vertical sequence.
2. Keep it on plane in normal temperature and no dust entironment (such as wood tank) for 5-10 minutes
3. Keep it in the ovens of the temperature of 140 degrees for 20 minutes. (temperatures up to 144 degrees recommended)
4. Make it cooled at room temperature

IV.Preserve and quality pledge
These products are inflammable, explosive materials, should be preserved hermetically under a shade dry place
Durability period : 6 months (from the production date)
V.Outdoor they can endue ultraviolet ray for 10 years
VI.Reference dosage can be 5 metres per litre


product performance

I.Price
Than direct purchase market with cheap 30%-50% heat transfer printing coating to the fallen.
II.Colour and purity
The product is a kind of pure and colorless clear transparent liquid, after heat transfer printing, the color is flamboyant and plump ,the pattern is clear and clean, the performance of proper effect is true, and the expressive force of color is well. But the characteristics of some other market products are: the colour is a little yellow and dim. there are even have impurities in the products, and the color will turn yellow or punch-drunk after transfer printing, it is hardly to achieve the primary effet
III.Hardness
The surface hardness of the product is greater than 2H, the adhesion is strong, and can't desquamate .crack or become bubbly. Other market products : hardness is not strong enough. the adhesion is poor, they may be desquamate .crack or become bubbly in a short time.
IV.Operability, stability and quality pledge
Opening the cover ,the products can be used directly, it is not necessary to mix up or append anything else. The remainders can be poured back and used next time, the operational procedures are concise and it have a good stability so they can preserved conveniently. Other products : They can't be used directly and need to add additives. The remainders couldn`t be reused and the operation is complicated, what is worse, they does not guarantee the quality of each mixing time. The stability is poor, and long-term preservation might arise unpredictable chemical reactions such as solidification, sedimentation, and so on
V.Personalized products
The kind of coat can be sprayed directly and easily on high temperatures-resistant (200 degrees) materials
VI.
Special-grade product enduring ultraviolet ray protection layer and surface protection coating can be used in and out of door respectively, and it solved the defects of transfer printing products turning yellow or fading in the outdoor environment and enhanced the climate-resistant such as products surface hardness, the capability to resist acid and alkali and the anti-sandstorm ,enable the transfer printing technology used freely in the vast outdoors. Other products : single in use, small market, couldn`t used for outdoors.
VII.
We owned a lot of transfer printing technical reserves and follow-up products to provide, such as gold, silver, mercerizing, pearl and so on. We can also customize personalized products according to various users` demand , such as heat transfer printing primary and surface layer of different colours
VIII.The product is a kind of green product in accordance with international standards
The kind of coat can be sprayed directly and easily on high temperatures-resistant (200 degrees) materials
Other series of products
We offer gold, silver, mercerizing, and other special effect products, we can also customize various personalized products according to users` demand such as heat transfer printing primary and surface layer of different colours