Qingdao Magnetic Digital Co.,Ltd   First Step: Fix the nail printer If you place it on a smooth table(e.g. glass), you can use the suction handle on the side of printer to fix it on the table, this can let you operate AMISY Nail Printer better. Second Step: Select the patterns you like. Select the patterns you like from the pattern plates, and put the pattern plate on the nail printer. Note: Let the pattern face the inner side of machine.   Third Step: Adjust the position of fingers. Push the movable board by finger, adjust the finger nail to a suitable position(the reference line on both sides of machine is the printing position), And turn the knob besides the printer to fix the movable board. Note: Finger must place on the raised point of movable board. Fourth Step: Brush the coat quickly Select the color of special nail polish, and brush it on the pattern quickly.   Fifth Step: Move the print head quickly. Move the movable print head to the upper place of the pattern plate quickly, and press down the above button quickly. Sixth Step: Print the pattern on the nail Move the movable print head to the upper place of finger quickly, and press down the above button quickly. Then the basic nail art process is finished.