using method of water transfer printing

1. print the picture by reverse printing.
2. the surface of the object which need transfer printing must be clean enough.
3. put the printed transfer printing picture into water for about 3~5 seconds, making the picture saturated completely
4. cling the transfer printing picture( the picture side) on to the object then use some thin tool( such as ruler) scrape the water and air away.
5. wait for 30 seconds and move the paper away, (note: the paper should be removed to a single direction stepless) then the image will transfer print on the object.
6. Wipe the water on the surface away by strong and soft absorbent paper( such as face tissue) and wait it for dry, the transfer printing is finished.
7. if you spray a layer of light oil on the surface, the effect and storage period would greatly enhanced.